Thursday, May 24, 2012

High Gradient Magnetic Separator manufacturers


 tar Trace, a leading and established company offering an extensive range of High Gradient Magnetic Separator. We incepted ourselves with motto to manufacture and supply superb quality Magnetic Separators. Today company has established in the field of High Gradient Magnetic Separator manufacturing industry. Our company is assisted by industrially trained professionals who hold specialization in this field. We offer these products at marketing leading prices across India and other parts of world as well. 
Operating Principle 
The principle (simplified) equation for the magnetic attraction force on a particle is:
Fm=Const. xVxXxHx grad H
V is particle volume
X is particle magnetic susceptibility
H is magnetizing field grad H is magnetizing gradient 
From this fundamental equation is evident that with homogenous magnetic fields (grad H = 0) there is no resulting attraction force on the left particle. This is illustrated where the left part show the undisturbed and the right part a disturbed field. Field gradient is show here by the varying distance between field lines. Any sharp edge of small dimension will cause such a field distortion, and hence an increased gradient. The famous illustration of this is an ordinary permanent horse-shoe magnet and iron file achieving. Here the achieving will stick mostly to the edge of the poles due to the increased gradient. 
The Star Trace High Gradient Magnetic Separator design is a reversal of a normal electric "bar" magnet. This overcomes many of the imitations of working within the air gap of the conventional horse a hoe shape. The most important advantage is that the return frame cross-section can be increased to cope with higher field strengths without saturation. 
The resulting homogenous magnetic field inside the solenoid is then manipulated inserting varying types of matrices into the canister. The type of matrix is a function of feed particle size. For coarser particle (up to 1mm) a grid of expand metal is used, and for very fine particle sizes (clay), steel wool is used. Matrix material is either stainless steel or another ferromagnetic material. In this way field strength, field gradients, and matrix flow-through capabilities can be optimized for each case. 
The magnetic separator is cyclic or discontinuous, since it must be stopped and demagnetized for flushing out the trapped magnetic particles. It use is therefore limited to feeds with low enough magnetic content, to permit acceptable cycle times. For applications with higher contents of magnetic a continuous variety of this principle, the High Gradient Magnetic Separator carousel, is available.

No comments:

Post a Comment